Ceramic Tile Flooring
flooring is one of the easiest floor surfaces to maintain. You would only
need basic cleaning tools, a little common household cleaner, and water to
clean your ceramic tile flooring..
In order to obtain the convenience of easy cleaning, you would need to
choose the appropriate
ceramic floor tile. To clean
your ceramic tile flooring, follow these typical steps:
* Remove loose dirt of your ceramic tile flooring with a vacuum cleaner or a
* Mix a small amount of cleaner with warm water
Note: follow the cleaner manufacturer’s instructions for the proper ratio of
cleaner to water.
* Using a cotton mop, sponge, or other soft apparatus, clean the ceramic
tile flooring, then thoroughly rinse with clean water, and allow to dry
Note: rinsing is very important, since dried detergent not only dulls the
finish, but can trap abrasive dirt particles. Also, if your tile has a
polished finish, you should dry it with a soft towel to prevent water spots.
For heavily soiled ceramic tile floorings, let the cleaning mixture soak
into the dirt for 5-10 minutes before mopping or scrubbing. Clean small
areas at a time and do not let the cleaning solution dry on the tile. Be
sure to rinse the area thoroughly before cleaning another. More difficult
dirt and stains may require scrubbing with a nylon pad or brush.
Using the suggestions above and by following your ceramic tile flooring
manufacturer’s recommendations, you’ll keep that shine on your new tile…for
a good, long while.
constantly looking for products and information about ceramic tiles. Please contact us to send us your ideas.
contact us for
advertisement information and other matters.